Are you unable to connect to Netgear WiFi extender’s default SSID, Netgear_ext Don’t worry! This is one of the most common issues experience by everyone who owns a Netgear extender. In this article, we are going to provide you relevant fixes that will surely help you connect to Netgear_ext. Let’s start over!
There can be many reasons that may be stopping you from connecting to Netgear_ext. A couple of them are highlighted below.
- Netgear extender’s SSID is hidden
- You have changed the default SSID of your Netgear extender
- Your Netgear extender and router are not properly connected
Fixed: Can’t Connect to Netgear_ext
Fix 1: Power Cycle Your Netgear Extender
To get connected to Netgear_ext without any hassle, then you need to reboot your power cycle your Netgear WiFi extender. For this, you just have to unplug your Netgear extender from its respective wall outlet, wait for a couple of seconds, and then, plug it back in again.
Now, see if you are able to connect to Netgear_ext. If yes, then access the Netgear Genie setup page and make changes to the extender accordingly. In case not, then don’t wait much for trying the next hack highlighted below.
Fix 2: Check if You Can See the SSID
There is a possibility the SSID of your Netgear range extender is hidden. If yes, you now have the actual reason in hand, why you can’t connect to Netgear_ext. So, without thinking much, enable the SSID of your Netgear wireless range extender right away. Apart from this, if you have changed the WiFi network name of your range extender, ensure that you are connecting to it.
If the things are still not in your hand, we suggest you refresh your network list.
Fix 3: Verify the Connection
Are you sure that your router and Netgear extender are properly connected? It seems not! To fix the issue and to make Netgear_ext visible on network list, ensure to create a proper connection between your router and Netgear WiFi range extender.
Fix 4: Configure Your Extender Properly
Chances are your Netgear WiFi range extender isn’t configured in a proper way. If yes, then there might be problem because only after a successful Netgear extender configuration, you get its SSID.
So, to deal with improper Netgear extender configuration issue, we suggest you reset your Netgear WiFi range extender. For this, just press and hold the extender’s reset hole for a couple of seconds, and release it after that.
Once the extender gets reset successfully, perform the Netgear extender setup process from the scratch using www.mywifiext.net Just in case, www.mywifiext.net doesn’t work for you, use 192.168.1250 instead.
Fix 5: Update the Device
You may not be able to see Netgear_ext on the list of networks or get connected to it if the device you are using is outdated. So, without thinking much, update the device you are using to connect to Netgear_ext right away.
Fix 6: Relocate Your Netgear Extender
If your extender’s WiFi signals are getting interrupted, then also you will not be able to see it on network list or connect to it. So, the perfect way to fix it is to change the current location of your Netgear WiFi range extender. Place it (the extender) in same room as of your router and away from windows so that it doesn’t catches neighboring WiFi signals.
The Last Words
Now, we are going to give this piece of writing an end. We hope that it helped you connect to Netgear extender’s default SSID, Netgear_ext. If yes, get connected to it and enjoy the seamless internet connectivity from any corner of your house, be it store room, balcony, terrace garden, or a blind spot in your home.