In this networking era, Netgear Nighthawk routers are those who have gained a lot of users due to their stupendous features. The device is known to take the WiFi signals emitted by the modem and transmit them to every corner of the house. But, what if the Netgear router denies connecting to the internet? This is where this article will come to rescue you. Know that the Nighthawk router’s inability to connect to the internet can stop you from accessing the default web URL i.e. routerlogin.net. Therefore, get down to the reading and start giving a shot to the hacks mentioned below.
Fixed: Netgear Router Not Connecting to Internet
- Bring the Modem Close to Router
Since the modem feeds the WiFi signals to your Netgear Nighthawk router, it is necessary that there is a clear line of sight between them. In other words, we are advising you to put both of these devices within each other’s range. However, it doesn’t mean that you let them share the same table. There needs to be a fine distance between them. It must be the distance that allows them to communicate effortlessly without giving rise to a clash of their wireless signals.
- Try to Remove Interferences
Your Netgear Nighthawk router might also deny connecting to the internet if there are a lot of interference-causing factors present near it. They are those objects or devices that tend to reflect, absorb, and divert WiFi signals. Thus, you should be aware of the same and keep such things or devices away from your Nighthawk wireless router. We are mentioning some of the WiFi interference-creating factors for you:
- Televisions
- Microwave ovens
- Baby monitors
- Bluetooth speakers
- Mirrors
- Aquariums
- Geysers
- Refrigerators, etc.
- Have a Look at Ethernet Connection
The Ethernet cable is the element serving as the source of direct communication between the Netgear router and modem. However, if it is damaged, it has the complete power of giving rise to the Netgear router not connecting to internet issue. Not only a damaged Ethernet cable, but the shakable status of the Ethernet connection at the ports can also drag you to the issue you are facing. Therefore, we advise you to examine the Ethernet connection. If the Ethernet cable is found damaged, you have to replace it. Otherwise, you can simply make the connection finger-tight if the shaky connection is detected. Once you’re done making the connection accurate, try accessing the Netgear Nighthawk router login screen. Are you able to? If not, the next hack might help you.
- Reboot the Router
Rebooting the Netgear Nighthawk router can also help you rid of its zero connectivity status with the internet. The miracles of rebooting have been admitted by many. It is one of the most popular methods to get rid of technical glitches. Thus, why don’t you reboot the router? Don’t worry! It will cause zero harm to the router’s performance. On the contrary, it will help in keeping technical glitches miles away. The process of rebooting only involves unplugging and re-plugging of the Netgear Nighthawk router. However, you need to ensure that there’s an appropriate time gap between the unplugging and re-plugging of the Nighthawk router.
- Keep Your Router Cool
Have you ever wondered about the amount of heat emanating from your Netgear Nighthawk router? Well, check it out right now! Is it too much? Yes? It seems that the denial of the internet connection is due to the overheating of the router. Relax! You can do more than you think to prevent the overheating of the router. Just consider keeping it in a cool place. By that, we mean placing it in a room with proper ventilation. However, avoid the location near the direct source of heat (sunlight, hearth). Additionally, placing the router above electronic gadgets is prohibited. You can build a habit of giving rest to your router by rebooting it.
Verdict
It is an annoying experience when the Netgear router refuses to connect to the internet as it halts numerous online tasks. It is expected that the aforementioned hacks have helped you regain the active status of the internet connection on your Netgear router.
In case you are still clueless as the issue has not been resolved yet, then the inappropriate Nighthawk router setup is the only reason left that has a tendency to drag you to the issue you are facing. Thus, without making much effort, consider resetting your router to the default factory mode by pushing the Reset button. It will help you get rid of the issue in one go. However, remember to install the router again as soon as you’re done with the reset procedure.