Are you an owner of a Linksys wireless range extender but are not able to take full benefit from it because of the red light issue? Well, know that worrying will take you nowhere. It will only cause unwanted stress in your mind and prevent you from fixing the issue at hand quickly. You just have to carefully walk through the solutions mentioned in this article to get rid of the issue that you are facing. But, before that, you need to know the reasons why you are facing it. Perhaps, you have not done Linksys WiFi extender setup properly or maybe the firmware of your range extender is not updated to its latest version.
Whatever the reason might be, the information presented forth you will surely help you to turn the status of the LED light from red to green. Bearing this in mind, you need to read on.
How to Convert Linksys Extender Red LED to Green?
1. Update the Linksys Extender
This is the first method through which you can try to resolve the Linksys extender red light issue, i.e. Linksys extender firmware update. Updating the firmware of the networking device will not just help you fix the at hand but also work on the overall performance of your wireless range extender. It will enhance its productivity in other words.
Along with this, your device will get equipped with the best security features that have been added to the model that you own by the company. To learn how to update your device, you should read and implement the instructions which are given in the user manual of your networking device received at the time of purchase.
2. Check the Electrical Socket
Chances are that your Linksys wireless range extender is not getting an uninterrupted power supply from its wall socket. To prevent this reason from ruining the performance of your networking device any further, it is recommended that you call up an electrician and ask him to fix the wall socket at your house.
Although this will work for you, by any chance, if it refuses to, then take our advice and plug your extender into another wall socket. Just make sure that it is located in the same room where the host router is kept. This will ensure that the signals emitted from the router are extended properly by the extender throughout the house.
3. Reset the Linksys Extender
In case you are still not able to resolve the Linksys extender red light issue, then you should restore your wireless range extender to its default factory settings. The same can be done if you locate and press the reset button located on your networking device using an oil pin and hold on for more than thirty seconds.
Once you are done resetting your device, let it reboot. After that, perform Linksys extender setup either with the WPS method or the manual method. The choice is totally yours. By the way, if you ever decide to bring a Linksys Velop device to your home and would like to perform Linksys Velop setup, then refer to the guidelines given in the manual again.
Final Words
We are very positive that the troubleshooting solutions discussed above will help you resolve the Linksys extender red light issue. In case, you are still losing your mind because of it, then you can try the methods which we have discussed in this conclusion paragraph. The first method requires you to reboot or restart your networking device; the second one requires you to remove any external interference like Bluetooth speakers, baby monitors, cordless phones, washing machines, treadmills, televisions, and microwave ovens. Along with this, do not keep the extender near concrete walls.
As soon as you are done following these additional solutions, you will be able to change the status of the LED light from red to green. We sure can say that.