Linksys RE-4100W extender setup is an undisturbed process. There are two methods by which you can easily set up your Linksys RE-4100W extender. Read this article carefully.
Let’s jump in.
Basic Requirements For RE-4100W Extender
Before moving ahead, we suggest some essential things you will need during the setup time.
- Require an active router with an internet connection.
- Need of one electrical power outlet.
- Require any WiFi device such as a laptop, computer, smartphone, etc.
- In last, need one ethernet cable.
These are the few things that you need to install an extender.
Features Of Linksys RE-4100W Extender
Linksys WiFi extender helps to cover the WiFi dead zone area of a house or office. It works on both frequency bands 2.4GHz and 5GHz. It extends the range of the WiFi network up to 7500sq ft. Place your extender in a halfway location of your house. RE-4100W extender is a music streaming function that allows users to start music through an extender.
Setup Linksys RE-4100W Extender
There are two methods for the configuration of an extender.
Web-Based Setup Process
First, you have to join your extender to the router by the wireless or wired method. For a wired connection, place one end of the ethernet cable into another end of an extender port and another end into the router port. For wireless connection connect your WiFi extender to the router’s WiFi network. Follow these rest of the few steps.
- Once the connection is done, put the plug of an extender in the power socket.
- Now, wait for a few minutes till the LED light of an extender turns solid blue.
- Open a default page of an extender on your device.
- Now use the Linksys web address extender.linksys.com in URL bar of web browser.
- On display, the page enters the username and password of an extender.
- After this, start a setup and use an admin as a password.
- Finally, click on ok and the setup of an extender is successfully done.
By Using WiFi Protected System
The WPS method is another convenient way to set up an extender. Use the WPS button on both the router and extender. Make sure that your router supports the WPS button. If not then replace your old router with the new one.
- To start with, put the plug of an extender in a power socket.
- Then, press the WPS button of Linksys extender.
- After that, press the WPS button on the router.
- Now, wait for a few whiles to check the LED light of both the extender and router changes into solid blue.
- As a result, the setup of an extender and router is successfully done.
Note: If you are facing any trouble during the Linksys extender setup, then follow these steps to fix this issue.
Troubleshoot Setup Issues
- Place your extender closer to the router during the process of extender setup.
- Check your router works properly as it should.
- See the all LED lights of an extender.
- Remove an extender from the wall socket and after a few minutes put the plug back in it.
- Upgrade the firmware of an extender.
- Reset your Linksys extender if it is need.
Verify Status of Linksys RE-4100W Extender
If you want to check the working status of the Linksys WiFi extender to get better performance then follow these steps carefully.
- Go to the web page of Linksys WiFi Extender.
- On the screen, page click on status and then device information.
- In the network address, verify the default gateway and subnet mask.
- The two numbers of an extender should be the same as the number of the router.
Tip: After the setup of the Linksys extender, if you want to change any type of settings then you can go to the Linksys extender login portal. In the login portal, enter your username and password. After this, you will enter the settings of the Linksys extender and easily change any settings.
Conclusion
We believe, after reading this post users will be able to understand the Setup and troubleshooting issues if they face any issues. Stick around near this post for more updates.