Wavlink repeaters have gained quite a popularity amongst people. The reason is their stupendous features and excellent performance. However, users need to tweak the settings of their devices in order to extract their best and customize the digital experience. What stops them from doing so is their inability to access the Wavlink WiFi extender IP address.
Are you also struggling with the same problem? If your answer is yes, then stop worrying. You’ve successfully reached the post where you will find the solution to the problem you are facing. So, read on
[Solved] Can’t Access Wavlink Repeater IP
- Check the IP Address Entree
Start troubleshooting the problem you are facing by checking the IP address entree? Did you enter it correctly? Probably not. Otherwise, you won’t be stuck with the issue you are currently struggling with. But, it’s not too late now.
Type in the correct IP address and see if you get success in accessing it. If not, then chances are that you have used the search bar of the internet browser to access your Wavlink repeater’s IP. Thus, rectify your mistake and use the address bar.
- Update the Web Browser
The web browser plays an important role when it comes to accessing the Wavlink setup wizard using the default repeater IP. But, are you aware that it needs to be running on an updated version in order to access the Wavlink IP? Let us tell you that you need to update the web browser before entering the repeater’s IP into the address bar. If the browser you are using is outdated, switch to the one that is not.
Additionally, the internet browser used for the process of accessing the repeater’s IP address needs to be junk-free. If you don’t get us then navigate to the settings of the browser and delete all unnecessary files to resolve the issue at hand.
- Decrease the Extender-Router Distance
Imagine that- You are standing at the main entrance of your friend’s house and he is sitting in the room at the extreme corner. Will he be able to listen to your voice? The answer is no. Then, how would you expect your Wavlink extender to receive signals when the router is placed at the farthest end of your house?
Therefore, decrease the distance you have imparted to your WiFi devices. It will allow a streamlined communication between them. But, placing them too close can be bad. Why? It is because their WiFi signals will get clashed in that case.
Note: You can also create the extender-router connection using an Ethernet cable. But, keep in mind not to use a damaged one.
- Delete Viruses
Many users are unaware that viruses are affecting their PC’s performance which in turn restricts them from accessing the repeater’s IP address. Perhaps, you are unknowingly the victim of the same. The best Wavlink troubleshooting tip is to get rid of those viruses.
But, before that, you need to be ensuring about their presence. For this, run a scan on your PC either with the help of inbuilt antivirus software or one which is third-party. If you detect any virus, delete it as soon as possible.
- Reboot the Wavlink Repeater
Did nothing work to take you out of the pit of the Wavlink extender issue? Well, rebooting might help. In case you are wondering how then know that rebooting is an effective solution to bid adieu to numerous technical glitches. So, without giving a second thought, reboot your Wavlink range extender.
For this, pull the extender’s plug out of its respective wall socket, have a walk for a while, and let the repeater rest. Thereafter, plug in the extender back to the power socket and see if the issue continues to trouble you.
The Ultimate Thoughts
After following the above-mentioned troubleshooting tips, you will be able to get success in accessing the Wavlink repeater’s IP address in an easy manner. In case you are still having the same fate, it is high time to go for the factory default reset process.
Once your extender resets, set it up from scratch using the default Wavlink login password Thereafter, customize the extender’s settings via the Wavlink repeater setup wizard.